One of the great features of the DM-processor is the input and output RTA. If you are installing an aftermarket head unit, you can skip this step. By moving that point, it will then be moved on the linked corresponding output channel.Īfter you have set your crossovers up for all of your channels, we will then want to move to input summing. As highlighted by the arrow, they now share the crossover point. In the examples below, we’ve linked the 1-2 output with the 3-4 output via the “Link” button. You can also “link” the crossover together for multi-way systems. With the “link” engaged, the high pass filter of one output pair will adjust the low pass filter on the linked output. To customize these settings to fit your install, it’s as easy as either moving the slider to get the desired figure, or just typing the crossover frequency directly into the window. You can also choose between a 12 or 24 db per octave slope. The factory default settings for the crossovers are as follows:Ĭhannel 9: Bandpassed from 30 Hz to 90 HzĬhannel 10: Bandpassed from 30 Hz to 90 Hz We can choose between which outputs we are setting by selecting the output channel tabs at the top center of the window: To do this, we will be using the Output view window. We need to go thru all the following steps before we are ready to send audio to the aftermarket amplifiers.*** ***IF AT ANYTIME THE DM PROCESSOR LOOSES CONNECTION WITH THE COMPUTER, IT IS ALWAYS RECOMMENDED TO POWER CYCLE THE PROCESSOR TO REGAIN CONNECTION*** SETTING CROSSOVERSįirst, we want to set our crossovers for the outputs. ***SPECIAL NOTE*** At this point, you should have the DM processors inputs connected, but NOT the RCA outputs.
#Auto eq stereo tools software#
Please refer to the Knowledge Base article HERE for software installation instructions. Navigate to the page for the processor you purchased then scroll to the Downloads section at the bottom of the page.īefore installing the software your processor should be powered on and connected to your computer via USB cable.
![auto eq stereo tools auto eq stereo tools](https://www.xda-developers.com/files/2020/05/Screenshot_20200516-114648-512x1024.jpg)
![auto eq stereo tools auto eq stereo tools](https://agetintopc.com/wp-content/uploads/2021/01/Stereo-Tool-4.-01-Plugin-for-Winamp-2009-Offline-Installer-Download-GetintoPC.com_.jpg)
#Auto eq stereo tools download#
You will need to download the DM Smart DSP software from the AudioControl website. When first setting up the DM-608/810 or D-4.800/6.1200 products, there is a recommended order of setting up the processor to achieve maximum performance and benefit from the processor.įirst things, first.